- Pick up from the itshopsa.com
To pick up today
Free
Cisco® Catalyst® 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9115AXI-F is the Cisco Catalyst 9115AX Series Access Point, Internal antenna; Wi-Fi 6; 4×4:4 MIMO, F Domain.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
To pick up today
Free
Payment Methods:
C9115AXI-F Specification |
|
Description | Cisco Catalyst 9115AX Series, F Domain |
Software | • Cisco Unified Wireless Network Software Release 8.9 or later
• Cisco IOS® XE Software Release 16.11or later |
Supported wireless LAN controllers | • Cisco Catalyst 9800 Series Wireless Controllers
• Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
802.11n version 2.0 (and related) capabilities | • 4×4 MIMO with four spatial streams
• Maximal Ratio Combining (MRC) • 802.11n and 802.11a/g beamforming • 20- and 40-MHz channels • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 Dynamic Frequency Selection (DFS) • Cyclic Shift Diversity (CSD) support |
802.11ac | • 4×4 downlink MU-MIMO with four spatial streams
• MRC • 802.11ac beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support |
802.11ax | • 4×4 downlink MU-MIMO with four spatial streams
• Uplink/downlink OFDMA • TWT • BSS coloring • MRC • 802.11ax beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support |
Integrated antenna | • 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth
• 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
External antenna (sold separately) | • Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
• Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
Interfaces | • 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
• Management console port (RJ-45) • USB 2.0 (enabled via future software) |
Indicators | • Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) | • Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
Input power requirements | • 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
• Cisco power injector, AIR-PWRINJ6= • 802.3af PoE • Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. |
Environmental | Cisco Catalyst 9115AXI
• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) • Nonoperating (storage) altitude test: 25˚C, 15,000 ft. • Operating temperature: 32° to 122°F (0° to 50°C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40˚C, 9843 ft. Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4×4 to 2×2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) • Nonoperating (storage) altitude test: 25˚C, 15,000 ft. • Operating temperature: -4° to 122°F (-20° to 50°C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40˚C, 9843 ft. |
System memory | • 2048 MB DRAM
• 1024 MB flash |
Available transmit power settings | 2.4 GHz
• 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1 dBm (0.79 mW) • -4 dBm (0.39 mW) 5 GHz • 26 dBm (400 mW) • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1 dBm (0.79 mW) • -4 dBm (0.39 mW) |
Frequency band and 20-MHz operating channels | F regulatory domain:
• 2.412 to 2.472 GHz; 13 channels • 5.250 to 5.350 GHz; 4 channels • 5.725 to 5.825 GHz; 4 channels |
Brand |
Cisco |
---|
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
Brand |
Cisco |
---|---|
AP Generation |
WiFi 6 |
Environment Type |
Indoor |
Type of Access Point |
Ceiling Mount, Wall Mount |
To pick up today
Free
Payment Methods:
No account yet?
Create an Account